|
| PRINCIPAL PROPERTIES |
SPECIAL PLASTIC ALLOYS |
| COMMERCIAL NAME |
Techstar
D106 |
Techstar
D706 |
Techstar
D801V0 |
| MANUFACTURER/SUPPLIER |
Goodtech Plastics |
Goodtech Plastics |
Goodtech Plastics |
| FILLER OR COPOLYMER |
ABS/PC |
PC/ABS |
PC/ABS |
| SPECIAL FEATURES |
Easy flow,good impact |
High HDT,high impact at low temp. |
Flame retardent |
| USES |
Auto/Cover/Hardware |
Auto/Cover/Hardware |
Auto/Cover/Electrical |
| RATINGS |
|
|
|
| PROPERTIES English Metric Processing
Methods |
Injection |
Injection |
Injection |
| Processing Temp |
500°F 260 |
518°F 270 |
518°F 270 |
| Linear Mold Shrinkage in/in |
0.005-0.007 |
0.005-0.007 |
0.005-0.007 |
| Melting Point |
|
|
|
| Density lb/ft3 g/cm3 |
68.6 1.10 |
70.5 1.13 |
75.0 1.20 |
| Tensile Str, Yield lb/in2
kg/cm2 |
7.39×103 520 |
8.25×103 580 |
8.39×103 590 |
| Tensile Str,Break lb/in2
kg/cm2 |
|
|
|
| Elongation,Break |
50% |
60% |
30% |
| Tensile Modulus lb/in2 kg/cm2 |
|
|
|
| Flexurals Str, Yield lb/in2 kg/cm2 |
1.13×104 800 |
1.22×104 860 |
1.32×104 930 |
| Flexural Modulus lb/in2
kg/cm2 |
3.27×105 2.30×104 |
3.4×105 2.4×104 |
3.63×105 2.55×104 |
| Compressive Str lb/in2 kg/cm2 |
|
|
|
| Izod,Notched, R.T. ft lb/in kg cm/cm |
9.52 52.0 |
10.69 58.4 |
9.75 53.3 |
| Hardness(Test) |
R109 |
R115 |
R116 |
| Linear Therm Expan in/in ℉ cm/cm ℃ |
4.0×10-5 7.20×10-5 |
4.0×10-5 7.20×10-5 |
4.0×10-5 7.20×10-5 |
| Continuous Svc Temp |
|
|
|
| Defl Temp, 264lb/in2 |
212°F 100 |
221°F 105 |
203°F 95 |
| Defl Temp, 66 lb/in2 |
221°F 105 |
257°F 125 |
221°F 105 |
| Volume Resistivity Ohm cm |
|
|
|
| Dielectric Strength V/10-3in
V-mm |
|
|
|
| Dielectric Constant,106Hz |
|
|
|
| Dissipation Factor,106Hz |
|
|
|
| Water Absorb,24 hr |
0.2% |
0.2% |
0.15% |
| Notes |
|
|
|
| PRINCIPAL PROPERTIES |
SPECIAL PLASTIC ALLOYS |
| COMMERCIAL NAME |
Techstar
E106 |
Techstar
Y106GV0 |
Techstar
X106 |
| MANUFACTURER/SUPPLIER |
Goodtech Plastics |
Goodtech Plastics |
Goodtech Plastics |
| FILLER OR COPOLYMER |
PC/PBT |
PBT/ABS |
PA/PPO |
| SPECIAL FEATURES |
Good impact&chemical resist,dimensional
stability |
Glass fiber 30%,exc stiff,high impact&dimensional
stability |
Good heat resist.&chemical resist,dimensional
stability,high impact |
| USES |
Auto/Cover/Hardware |
Mechanical pts |
Auto/Mechanical pts |
| RATINGS |
|
|
|
| PROPERTIES English Metric Processing
Methods |
Injection |
Injection |
Injection |
| Processing Temp |
518°F 270 |
482°F 250 |
540°F 282 |
| Linear Mold Shrinkage in/in |
0.006-0.009 |
0.003 |
0.012 |
| Melting Point |
|
|
|
| Density lb/ft3 g/cm3 |
75.0 1.20 |
98.0 1.57 |
68.6 1.10 |
| Tensile Str, Yield lb/in2
kg/cm2 |
8.39×103 590 |
1.70×104 1200 |
8.39×103 590 |
| Tensile Str,Break lb/in2
kg/cm2 |
|
|
|
| Elongation,Break |
150% |
4% |
60% |
| Tensile Modulus lb/in2 kg/cm2 |
|
|
|
| Flexurals Str, Yield lb/in2 kg/cm2 |
1.23×104 870 |
2.42×104 1702 |
1.39×104 980 |
| Flexural Modulus lb/in2
kg/cm2 |
3.06×105 2.15×104 |
1.35×106 9.50×104 |
3.26×105 2.29×104 |
| Compressive Str lb/in2 kg/cm2 |
|
|
|
| Izod,Notched, R.T. ft lb/in kg cm/cm |
12.26 67.0 |
1.80 9.8 |
4.41 24.0 |
| Hardness(Test) |
R115 |
R121 |
R116 |
| Linear Therm Expan in/in ℉ cm/cm ℃ |
4.0×10-5 7.20×10-5 |
1.67×10-5 3.0×10-5 |
5.0×10-5 9.0×10-5 |
| Continuous Svc Temp |
|
|
|
| Defl Temp, 264lb/in2 |
204°F 96o°C |
338°F 170°C |
289°F 143°C |
| Defl Temp, 66 lb/in2 |
233°F 112°C |
410°F 210°C |
379°F 193°C |
| Volume Resistivity Ohm cm |
|
|
|
| Dielectric Strength V/10-3in
V-mm |
|
|
|
| Dielectric Constant,106Hz |
|
|
|
| Dissipation Factor,106Hz |
|
|
|
| Water Absorb,24 hr |
0.15% |
0.15% |
0.8% |
| Notes |
|
|
|
|
| |
|
|
|
